The EPA recommends that all houses, regardless of what radon zone the house is located in, be tested for radon during point of sale. The most common procedure for radon testing during real estate transactions is for the potential buyer to request the radon test as part of the overall home inspection. The radon test is generally a separate service and must be requested. If the radon test is 4 pCi/L or greater, the EPA recommends the potential buyer negotiate with the seller to have a radon mitigation system installed with the stated goal of bringing the radon level in the home below 4 pCi/L.
The homeowner of a house can test their home prior to listing the home for sale. If the homeowner does perform a radon test, most if not all states will require that the test result be disclosed on the whole house disclosure form you will fill out with your realtor. If the initial test by the homeowner comes back less than 4 pCi/L, potential buyers may still request an additional radon test as part of their home inspection. If an initial radon test by the homeowner is 4 pCi/L or greater, the issue will need to be addressed in the real estate transaction. A buyer may want to have a confirmatory test conducted. With an average radon level of 4 pCi/L or greater, it is recommended that a radon mitigation system be installed prior to placing the house on the market, to bring the radon level to less than 4 pCi/L.
Yes! The EPA recommends testing every two years because radon levels can change over time, but we recommend contacting your local health department or state health department to see if they have any free radon tests they can send to you. If you need any assistance or have any questions regarding where to put the test or what the results mean, we would be happy to still be a resource to you.
Radon Measurement NRPP Certification #102147-RT
Copyright © 2020 Turner Inspection Services - All Rights Reserved.
Powered by GoDaddy Website Builder